新闻动态
news
NEWS
联系我们

地址:无锡市胡埭工业园富来桥路10号
手机:18018396999
电话:0510-85183399
传真:0510-85181788
网址:www.wxsssh.com
邮箱:wxsssh@163.com

新闻动态
How to judge whether the slicer motor is damaged
Author:admin

When we use the slicer, it is inevitable that there will be such or such failures, which will lead to the equipment can not operate normally. How can we judge whether its motor is burnt out in the process of use? Including whether the motor temperature of the slicer is very high; measure the grounding resistance with a megger; smell whether the slicer has paste smell; open the junction box, remove the end connector, and test whether there is a short circuit with a multimeter. Turn to turn short circuit is measured by bridge.

If there is any of the above features, it means that the motor of the slicer may have been burned out. At this time, it is necessary to dismantle it, check and repair it, and ensure that the motor reinstalled can make the slicer work normally and reduce adverse effects.

Of course, the installation of the product also affects its working process, so we can not ignore its installation, which is the same for the slicer. It mainly follows the following requirements in the specific installation process. In the installation process, if the parts are not correctly installed in this part, or there is a certain deviation, then in the operation process of the machine, it will lead to the accuracy, supply, efficiency and other problems of the machine, directly affect the stability of the machine in operation and the deviation of the labeling position and so on.

Environment is one of the factors that affect the quality of slicer installation. According to the production space and environment of the enterprise, such as air temperature and site, if the label is lower than the humidity it bears, then the label cannot be pasted on the bottle; or because the humidity of the bottle is not within the tolerance range, similar situations will occur during the filling process. If there is wind in the installation environment, there will be a small part of the impact on the product, but as long as it is slightly improved, the problem is easy to solve.

WUXI SHUANGSHENG PETROCHEMICAL EQUIPMENT CO.,LTD. ALL RIGHT RESERVED.