新闻动态
news
NEWS
联系我们

地址:无锡市胡埭工业园富来桥路10号
手机:18018396999
电话:0510-85183399
传真:0510-85181788
网址:www.wxsssh.com
邮箱:wxsssh@163.com

新闻动态
The judgment of whether the slicer is overloaded and the adjustment of its blade
Author:admin

A high-quality slicer can not be separated from the operator. If the slicer wants to reduce the failure rate, it should have scientific and reasonable operation habits. Take overload work as an example, the slicer must not work under overload. Because the slicer has high rotation speed, large load, different materials, and large compound volatility, it should be timely tested for the load of the pulverizer.

The electric shock level meter is used to directly indicate the material level in the crushing chamber of the slicer, that is, to know its load; the belt scale is used to weigh the conveying capacity of the feeding belt conveyor of the wood slicer; the circulating load of the closed-circuit system of crushing and screening is calculated.

Detect the current value in the motor circuit of the slicer. The current of the crusher is generally controlled at about 85% of the rated current. In multi-stage comminution, generally only the load of the last stage of crusher which controls the particle size of the final product is detected. This stage of crusher is usually in a closed-circuit system, and its feeding amount includes the amount from the previous comminution stage and the circulating load.

The cutter is an important part of the slicer, it manages the quality of the slice, so as a staff must learn how to adjust the cutter. The width is formed by natural fracture, which depends on the shear strength of the cross grain of the raw material, which is slightly less than the length of the chipping generally; the length of the chipping extension determines the thickness of the finished product, and the thickness of the finished product can be adjusted by controlling the extension length.

Whether drum slicer or disc slicer is used, it is required that all blades extend the same amount and keep the distance between the flying knife and the bottom knife. The angle of the blade has a great relationship with the size, but generally, it can't be changed. Most of them have been determined by the manufacturer and can't be adjusted. It's recommended not to change the angle of the blade without understanding.

WUXI SHUANGSHENG PETROCHEMICAL EQUIPMENT CO.,LTD. ALL RIGHT RESERVED.