-
The advantages of multifunctional microtome and the key points in its work
The multi-functional slicer uses a rotating cutter head to cut various materials into pieces. It has the characteristics of good cutting quality, small cutting length error, uniform slice thickness, f… -
How to judge whether the slicer motor is damaged
When we use the slicer, it is inevitable that there will be such or such failures, which will lead to the equipment can not operate normally. How can we judge whether its motor is burnt out in the p… -
Equipment features and application scope of rolling scraper
The operation process of the rolling scraper is a cooling crystallization process. The molten material in the pan contacts with the cooling drum, forming a material film on the surface of the drum. Th… -
The judgment of whether the slicer is overloaded and the adjustment of its blade
A high-quality slicer can not be separated from the operator. If the slicer wants to reduce the failure rate, it should have scientific and reasonable operation habits. Take overload work as an exampl… -
Preparation stage and operation requirements of slicer
Before the slicer starts operation, it is the material preparation stage. It should be noted that the wet material is better than the dry one, and the material that is too dry may be cut into powder; …
«‹1›»
|